19
TES7.. | 08/2013
en
Cleaning the milk system
Important:
The milk system
10
must be
cleaned
immediately after use!
The milk system
10
can be pre-cleaned
automatically (see “Service programmes” or
cleaned manually.
Dismantling the milk system
10
for cleaning:
●
Pull the milk system
10
forward out of the
appliance.
●
Turn the upper part
10a
in an anti-
clockwise direction and remove from the
lower part
10b
.
●
Clean the individual parts with detergent
solution and a soft cloth.
● Rinse all parts with clean water and dry.
● Put all the parts back together. The milk
frother can then be clicked back into
place in the appliance.
Info:
All parts of the milk frother
10
can also
be put in the dishwasher.
Cleaning the brewing unit (Fig. F)
(refer also to the quick reference guide)
In addition to the automatic cleaning
programme, the brewing unit
20
should be
removed regularly for cleaning.
●
Switch the appliance off completely at the
power on/off switch
1
O / I
; no buttons
are lit.
●
Slide the door opener to the right and
open the door
19
to the brewing unit.
●
Slide the red lock
20a
on the brewing unit
20
completely to the left.
●
Press the red button
21
, grasp the
brewing unit
20
by the recessed grips and
remove carefully.
●
Remove the cover
20b
of the brewing unit
and rinse the brewing unit
20
thoroughly
under running water.
Summary of Contents for TES?712 Series
Page 4: ...14 10c 10d C D E 23b 24 23c 23a 10c 10d 13 10a 10b ...
Page 5: ...F 20a 20a 20a 20b 20 21 19 22 ...
Page 165: ......
Page 166: ......
