815_58300000120057_ara_en_d.doc – 25.05.11
Seite 34 von 60
1.1
Axial flow sensor
6.4.3 Removal
►
Remove the left side wall
►
Remove securing clip (1)
►
Pull the flow sensor (2) from the water inlet
►
Loosen the hose clip (3)
►
Remove supply hose (4).
►
Remove connector plug from reed switch.
6.4.4 Installation
►
Connect the supply hose (4) to the flow sensor (2)
►
Attach the hose clip (3)
►
Connect the reed switch connector plug
►
Attach the flow sensor (2) to the water inlet and secure it with
the securing clip (1)
►
Install the left side wall