Bosch SMI88TS01W Instruction Manual Download Page 41

Page: 41 / 54

Fault, what to do?

Error code

“

ƒ†

is lit.

Waste water pump blocked or

cover on the waste water pump is

not locked in position.

Clean pump and lock cover correctly.

"Waste water pump" on page 39

Error code

“

ƒˆ

is lit.

Mains voltage too low.

Not an appliance fault, have the mains

voltage and electrical installation checked.

A different error code is

indicated on the digital

display.

(

“

‹‚

“

„‹

)

A technical fault has probably

occurred.

Switch off appliances with the ON/OFF

switch

(

. After a short time restart the

appliance.

If the problem recurs, turn off the tap and

pull out the mains plug.

Call customer service and mention the

error code.

Refill indicator for salt

and/or rinse-aid

is lit.

No rinse aid.

Refill rinse aid.

No salt.

Refill with special salt.

Sensor does not detect salt

tablets.

Use different special salt.

Refill indicator for salt

and/or rinse-aid

is not

lit.

Refill indicator switched off.

Activation/deactivation (see chapter

“Water softening system/Special salt”

Page 16

or “Rinse aid”

Page 18

There is still enough special

salt/rinse aid available.

Check refill indicator, levels.

Water is left in the

appliance at the end of the

programme.

Filter system or area under the

filters

is blocked.

Clean filters and area underneath.

Program has not ended yet.

Wait until programme ends or reset.

Fault

Cause

Remedial action

Summary of Contents for SMI88TS01W























































Search results

Summary of Contents for SMI88TS01W

Reviews:

Related manuals for SMI88TS01W

Brands by name

Popular brands

Bosch SMI88TS01W, Instruction Manual

Search results

Summary of Contents for SMI88TS01W

Reviews:

Related manuals for SMI88TS01W

Brands by name

Popular brands