en
Installation and connection
50
Delivery
Your dishwasher has been checked
thoroughly in the factory to ensure that
it is in working order. This may cause
small water stains. These will disappear
after the first wash cycle.
Technical specifications
■
Weight:
up to 60 kg
■
Voltage:
220–240 V, 50 Hz or 60 Hz
■
Connected load:
2000 - 2400 W.
■
Fuse:
10/16 A (UK 13 A).
■
Power input:
off mode (Po)* 0.50 W.
left on mode (Pl)* 0.50 W.
*according to regulations (EU) nos.
1016/2010 and 1059/2010.
Additional functions and settings
may increase the power input.
■
Water pressure:
at least 0.05 MPa (0.5 bar),
maximum 1 MPa (10 bar).
At a higher water pressure:
connect pressure-reducing valve
ahead.
■
Inlet rate:
minimum 10 litres/minute
■
Water temperature:
cold water.
Hot water:
Maximum temperature 60 °C.
■
Capacity:
12–15 place settings (depending on
the features of your dishwasher).
Installation
The required installation dimensions
can be found in the installation
instructions. Level the appliance with
the aid of the height-adjustable feet.
Ensure that the appliance is situated
securely on the floor.
■
A built-under or integrated appliance
which is installed subsequently as a
free-standing appliance must be
secured to prevent it from
overturning, e.g. by screwing it to the
wall or by installing it under a
continuous worktop which is
screwed to adjacent cupboards.
■
The appliance can easily be installed
in a fitted kitchen between wooden
and plastic walls.
Drainage connection
1.
The required work sequence can be
found in the installation instructions.
If required, fit a siphon with an
drainage connection.
2.
Connect the waste-water hose
to the drainage
connection of the siphon with
the enclosed parts.
Ensure that the drainage hose is not
kinked, crushed or twisted and that
there is no cover
plate in the drainage to prevent
the waste water from flowing out!
Summary of Contents for SMI88TS01W
Page 2: ... Ù 5HVHW VHF 6HWXS VHF ...
