Bosch SMI88TS01W Instruction Manual Download Page 40

Page: 40 / 54

Fault, what to do?

Fault table

Fault

Cause

Remedial action

Error code

“

‚‰

is lit.

Supply hose kinked.

Install supply hose without kinks.

Tap turned off.

Turn on the tap.

Tap jammed or calcified.

Turn on the tap.

Flow rate must be min. 10 l/min. when

water supply is open.

Filter in the water supply blocked. Switch off the appliance and pull out the

mains plug. Turn off the tap. Unscrew

water connection.

Clean filter in the supply hose. Screw

water connection on again. Check for

leaks. Reconnect power supply. Switch on

the appliance.

Error code

“

‹ˆ

is lit.

Intake opening (on right inside of

appliance) covered by utensils.

Arrange utensils so that the intake

opening is not obstructed.

Error code

“

‚ƒ

is lit.

Heating element calcified or

soiled.

Clean appliance with dishwasher cleaning

agent or descaler. Operate the dishwasher

with water softening system and check the

setting.

" Water softening

system/special salt" on page 16

Error code

“

‚…

is lit.

Water protection system

activated.

Turn off tap.

Call customer service and mention the

fault code.

Error code

“

‚†

is lit.

Error code

“

‚‡

is lit.

Constant water inflow.

Error code

“

ƒƒ

is lit.

Filters

are soiled or

blocked.

Clean filters.

"Filters" on page 37

Error code

“

ƒ…

is lit.

Waste-water hose kinked or

blocked.

Install hose without kinks, remove any

residue.

Siphon connection still sealed.

Check connection to siphon and open if

required.

Cover on the waste water pump

loose.

Lock cover correctly.

"Waste water

pump" on page 39

Summary of Contents for SMI88TS01W























































Search results

Summary of Contents for SMI88TS01W

Reviews:

Related manuals for SMI88TS01W

Brands by name

Popular brands

Bosch SMI88TS01W, Instruction Manual

Search results

Summary of Contents for SMI88TS01W

Reviews:

Related manuals for SMI88TS01W

Brands by name

Popular brands