Bosch SMI88TS01W Instruction Manual Download Page 47

Page: 47 / 54

Fault, what to do?

Appliance cannot be

switched on or operated.

Malfunction.

Disconnect appliance from the power

supply; pull out the mains plug or switch

off the fuse. Wait at least 5 seconds, then

connect the appliance to the power

supply.

Appliance does not start.

The mains fuse has tripped.

Check mains fuse.

Power cord not inserted.

Ensure that the power cord is plugged all

the way into the back of the appliance and

into the socket. Check that the socket

functions.

The appliance door has not been

shut properly.

Close the door.

Programme starts

automatically.

You did not wait until programme

ended.

Perform reset.

The door is difficult to

open.

Child lock is activated.

Deactivate the child lock.

Door cannot be closed.

Door lock has been activated.

Close door with increased force.

Door cannot be closed due to

installation.

Check appliance installation: Door

or attached parts must close without

obstruction.

Cover on the detergent

dispenser cannot be

closed.

Detergent dispenser or cover

guide blocked by sticky detergent

residue.

Remove detergent residue.

Detergent residue in the

detergent dispenser

or in the tablet collecting

tray

Spray arms blocked by utensils,

therefore detergent is not rinsed

out.

Ensure that the spray arms can rotate

freely.

The detergent dispenser was

damp when filled.

Pour detergent into the dry detergent

dispenser only.

Appliance stops in the

programme or programme

is interrupted.

Door not closed properly.

Close the door.

Do not place utensils or fragrance

dispenser in the tablet collecting

tray.

Top basket presses against the

door and prevents door from

being closed securely.

Check whether rear panel is being

pressed in, e.g. by socket or by hose

holder which has not been removed.

Power and/or water supply

interrupted.

Restore power and/or water supply.

Filling valves making

striking noises.

Depends on domestic installation,

as appliance is not defective. No

effect on appliance function.

No remedial action possible.

Fault

Cause

Remedial action

Summary of Contents for SMI88TS01W























































Search results

Summary of Contents for SMI88TS01W

Reviews:

Related manuals for SMI88TS01W

Brands by name

Popular brands

Bosch SMI88TS01W, Instruction Manual

Search results

Summary of Contents for SMI88TS01W

Reviews:

Related manuals for SMI88TS01W

Brands by name

Popular brands