E n g l i s h
22
(Loading Your Dishwasher, continued)
C. Loading the Lower Rack
Place large bowls, pots, and pans upside-
down in the lower rack. If your dishwasher
has lower rack flip tines, fold them down to
accommodate large utensils such as serving
spoons and large knives. Figure 14 shows
the load pattern for 10 place settings, and
Figure 15 shows the load pattern for 12
place settings.
D. Accomodating Extra Tall Items
If an item to be loaded into the lower
rack interferes with the upper spray arm or
is blocked by the upper rack, simply remove
the upper rack and install the Extra Tall Item
Sprinkler.
Remove the Upper Rack
1. Pull the empty upper rack out of the
dishwasher to the point that it can be
lifted upward.
2. Pull the rack outward and up until the
rollers are completely free of the roller
guides.
3. Slide the roller guides back into the
dishwasher tub.
Install the Sprinkler
1. Insert the Sprinkler into the upper
rack spray outlet at the back of the
dishwasher tub as shown in Figure 16,
and turn the Sprinkler clockwise.
2. Place your extra tall item(s) in the lower
rack as in Figure 17.
Note: When the cycle is complete,
remove the Sprinkler by turning it
counter-clockwise until it comes loose
from the upper rack spray outlet. Do
this before you reinstall the upper rack.
Otherwise, your dishwasher could be
damaged.
Reinstall the Upper Rack
1. Tilt the upper rack upwards and
position the upper rack rollers onto the
roller guides.
2. Continue pushing the upper rack until
the rollers are on the guide.
3. Push the upper rack into the dish
washer tub.
(Continued on next page)
Operation | Fonctionnement | Funcionamiento
Figure 16/Ilus. 16
Figure 17/Ilus. 17
Figure 14/Ilus. 14
AHAM DW-1 10 Place Setting
Cubierto para 10 Personas
Figure 15/Ilus. 15
AHAM DW-1 12 Place Setting
Cubierto para 12 Personas
Summary of Contents for SHU43E
Page 3: ...2 ...
