Bosch series VG4-300, User Manual

Page: 23 / 139

VG4 Modular Camera System On-Screen Display Menu Navigation | en 23
Bosch Security Systems, Inc. User’s Manual F.01U.133.268 | 6.0 | 2010.03
2.8 Rule Setup Menu
The Rule Setup Menu shows the status of the rules and lets you add new rules or modify an
existing rule. The default setting is Empty .
Menu items marked with the ‡ symbol are available only with VG4 Pressure Domes.
Rule Setup Menu Choices
Selecting a Rule number provides access to its configuration menu. The Rule # Menu allows
you to configure a rule from previously defined alarm inputs and outputs. Once an alarm is
configured with valid inputs and outputs, it can be turned on or off (enabled or disabled)
through its configuration menu.
NOTICE! You can program a total of twelve rules. You must define the inputs and outputs
before you program a rule. See Section 2.7 Alarm I/O Setup, page 20 , to configure alarm inputs
and outputs.
Rule Setup... Rule 1
Exit... Exit...
1. Rule 1 Enabled Enabled YES
2. Rule 2 Disabled Input:
3. Rule 3 Invalid Low Pressure‡
4. Rule 4 Empty NONE
5. Rule 5 Empty NONE
6. Rule 6 Empty NONE
7. Rule 7 Empty Output:
8. Rule 8 Empty OSD
9. Rule 9 Empty Shot 2
10. Rule 10 Empty Alarm Relay 2 sec
11. Rule 11 Empty NONE
12. Rule 12 Empty
4. Rule 4 Empty
Right / Left: Select Period Time
Focus / Iris: Select Focus / Iris: Select Type
Menu Description Sub-menu / Description Default
Setting
Exit Saves and exits the
menu.
Rule 1-12 Displays the status
of a rule on the
right side of the
menu. There are
four (4) possible
rule statuses.
Enabled : The rule inputs and outputs are
properly defined and the rule is turned on.
Disabled : The rule inputs and outputs are
defined but the rule is turned off.
Invalid : The rule has a missing or invalid
input or output.
Empty : The rule has no inputs or outputs
defined.
Empty