RADION receiver OP
RADION smoke | en
43
Bosch Security Systems, Inc.
Reference Guide
2014.12 | 02 | F.01U.261.835
Figure 13.1: Remove the detector cap
4.
Squeeze the optical chamber where indicated and pull it up and away from the detector.
1
2
3
Figure 13.2: Remove the detector cap
1 * Optical base
2 * Optical chamber
3 * Alarm cap
5.
Use compressed air or a soft-bristled brush to remove dust and dirt from the smoke
chamber base.
6.
Align the optical chamber with the base and snap down into place.
7.
To attach the detector cap, line the cap up with the detector, press the cap onto the
detector, and turn clockwise to snap it firmly into place.
8.
Observing the proper polarity, install the batteries and the battery cover. If the batteries
are not installed properly, the detector will not fit onto the mounting base. Ensure that
the batteries are properly installed.
9.
Mount the detector onto the mounting base.
10. Test the detector’s sensitivity.
Summary of Contents for RFRC-OPT
Page 1: ...RADION receiver OP RFRC OPT en Reference Guide ...
Page 2: ......
