3.3 Symbols Used
Notes are displayed as follows:
This is a note.
Tips are displayed as follows:
This is a tip.
4 Intended Use
Bosch Rexroth hand-held terminals are PC-based machine operator terminals.
Danger of destruction of the device if not ex-
pressly stated accessories, mounting parts and
other components, cables, lines, software and
firmware are used.
NOTICE
The hand-held terminals may be used only as intended and with the accessories,
mounting parts and other components specified in this documentation. Compo-
nents that are not expressly mentioned must neither be attached nor connec-
ted. The same applies to cables and lines.
Operation must only be carried out with the hardware component configura-
tions and combinations that are expressly specified and with the software and
firmware indicated and specified in the respective documentation and function-
al descriptions.
Typical fields of use of the hand-held terminals are:
●
Handling systems and assembly systems
●
Packaging and food processing machines
●
Printing machines and paper converting machines
●
Machine tools
●
Wood processing machines
●
Welding controls
The hand-held terminals may only be operated under the mounting and installa-
tion conditions, the position, and the ambient conditions (temperature, degree
of protection, humidity, EMC etc.) specified in this documentation.
VCH 05.1
Bosch Rexroth AG
Intended Use
DOK-SUPPL*-VCH*05*****-IT02-EN-P
5/27
