R911345359 | WSC60GK/HA/ST
Bosch Rexroth AG
63/73
Scope of delivery
English
4
Scope of delivery
The scope of delivery is dependent on the order. Therefore we cannot
provide any globally valid information on the scope of your specific
delivery.
Check the scope of delivery against the delivery note.
5
Information on this product
For information on the special structure and the type-specific connections, please
refer to the type-specific circuit diagram located on the inner door of the switch
cabinet. All other important information about the devices are contained in the
Instructions of the timers, refer to Table 1 Required and supplementary
documentation.
6
Transport and storage
The following list gives an overview of the steps to consider during transport and
storage:
Please note the instructions on transport in Section 2 "Safety instructions".
Please note the instructions on transport and storage in Section 3 "General
notes regarding damage to property and products".
Make sure that the product is not exposed to conditions during transport,
which range outside the specification, refer to Section "Technical data" in the
Instructions Rexroth PSI6xxx, PST6xxx or PST6xx0 (Table 1 Required and
supplementary documentation).
Make sure that the product is properly acclimatized before use after storage /
transport in cold environment.
Transport over long distances and storage should take place in the original
packaging.
The welding cabinet or the suspended station must be transported upright.
Please address any questions regarding the transport and packaging
guidelines via email : [email protected]
7
Assembly
Follow the instructions on installation and assembly in the Section "Safety
instructions".
Please note the instructions on installation and assembly in the section
"General notes regarding damage to property and products".
Please follow the steps for assembly below.
