60/73
Bosch Rexroth AG
R911345359 | WSC60GK/HA/ST
General notes for property damages and product damages
3.4
Operation
NOTICE
Electrostatic charge
Possibility of damage to the electrical equipment!
Observe all precautions for ESD protection when handling modules
and components and avoid electrostatic discharge.
Observe the following protective measures for modules and
components sensitive to electrostatic discharge (ESD):
Personnel responsible for storage, transport, and handling
must have training in ESD protection.
ESD-sensitive components must be stored and transported in
the prescribed protective packaging.
ESD-sensitive components may only be handled at special
ESD workplaces.
Personnel, working surfaces, as well as all equipment and
tools which may come into contact with ESD-sensitive
components must have the same potential (e.g. by grounding).
Wear an approved grounding bracelet. The grounding bracelet
must be connected with the working surface through a cable
with an integrated 1 megaohm resistor.
ESD-sensitive components may by no means come into contact
with chargeable objects, including most plastic materials.
When inserting or removing ESD in/from other devices, the device
must be safely disconnected from the supply.
NOTICE
High-frequency interference
Possibility of interference with other devices in the environment!
Make sure that no other devices or their functioning can be affected
if the present product is operated.
The product is part of class A resistance welding equipment.
Class A resistance welding equipment is designed for industrial
networks (also refer to „intended use“ chapter 2.2).
Use in the public low-voltage network which supplies e.g.
residential areas therefore requires special measures.
