Training system mMS 4.0 | R901429162/04.16
Bosch Rexroth AG
41/68
Transport and storage
8
Transport and storage
8.1
Delivery and unpacking
Screwdriver, knife, pry bar.
Transport the wooden crate n upright to the place of unpacking using a fork lift
truck or pallet truck.
Open the wire ties on the wooden crate using a knife.
Using a screwdriver, undo the front of the wooden crates and put them away.
Open up the plastic packaging using a knife.
Carefully lift each station of the mMS 4.0 training system down from the pallet
and remove from the crate.
Carefully remove the cable ties and wire ties and dispose of them
appropriately.
Dispose of the pallet and wooden box properly or store appropriately for
subsequent use.
Any transport damage and defects must be noted right away and reported
in a written damage report.
Required tool:
CAUTION
Risk that the training system may fall over.
Risk of injury when lifting and transporting the machine!
When lifting and transporting the machine, always carefully do so with at least
two persons in order to prevent it from dropping.
Lift the mMS 4.0 training system by hand or with a floor conveyor.
Procedure
