Bosch REXROTH mMS 4.0 Operating Manual Download Page 18

Page: 18 / 68

18/68

Bosch Rexroth AG

Training system mMS 4.0 | R901429162/04.16

About this product

5.1

General information

The following sections of this operating manual illustrate

a variant of the mMS 4.0 training system and its components for example

purposes.

The three stations are described individually.
All operating manuals of the individual industrial components can be found

in the enclosed CD.

5.2

Product Description

The cube assembly installation comprises three stations:



Rack, workpiece detection station



Processing with pneumatic press station



High rack storage station

The three stations - rack, workpiece detection, processing with pneumatic press

and warehouse are arranged next to each other. They are connected to each other

mechanically, pneumatically and electrically. The cube assembly installation allows

the operator to set up, operate and monitor what is a fully automated process.

Fig. 4:

Training system mMS 4.0

Rack station

Processing with

pneumatic/hydraulic press station

High rack storage station

Summary of Contents for REXROTH mMS 4.0





































































Search results

Summary of Contents for REXROTH mMS 4.0

Reviews:

Related manuals for REXROTH mMS 4.0

Brands by name

Popular brands

Bosch REXROTH mMS 4.0, Operating Manual

Search results

Summary of Contents for REXROTH mMS 4.0

Reviews:

Related manuals for REXROTH mMS 4.0

Brands by name

Popular brands