Bosch Rexroth MKE E Series Project Planning Manual Download Page 9

Page: 9 / 138

1.1.2

Design

MKE motors are available in various designs. Conditional upon existing na‐

tional regulations and standards, the MKE motors have to be defferentiated

from the housing according to:
●

Design "E" acc. to European Standard (EU with cURus conform insula‐

tion system)

●

Design "U" according to American Standard (UL)

unterteilt werden.
The connection technology of the MKE motors is variously processed accord‐

ing to the national regulations.

Please heed the notes according to the valid national regulations

in the chapter ”Application Notes”.

DOK-MOTOR*-MKE*GEN2***-PR06-EN-P
Rexroth MKE Synchronous Motors for Potentially Explosive Areas acc. to ATEX and UL/CSA

Bosch Rexroth AG

7/135

Introduction to the Product

LSA Control S.L. www.lsa-control.com [email protected] (+34) 960 62 43 01

Summary of Contents for Rexroth MKE E Series











































































































































Search results

Summary of Contents for Rexroth MKE E Series

Reviews:

Related manuals for Rexroth MKE E Series

Brands by name

Popular brands

Bosch Rexroth MKE E Series, Project Planning Manual

Search results

Summary of Contents for Rexroth MKE E Series

Reviews:

Related manuals for Rexroth MKE E Series

Brands by name

Popular brands