click
MKE00103
Fig.12-11:
Plug-in interlock
4. Connect the encoder cable.
5. Mount the terminal box lid.
Set the terminal box lid (9) on the motor. Make sure that no wire can be
crushed or damaged.
6. Tighten the terminal box lid ⑥ with the added TFL-coated lid screws ⑦
with 6.1 Nm.
When changing the lid screws ⑦ do only use hexagon socket-
head bolt acc. to DIN EN ISO 4762 with strength 8.8 (or higher).
When mounting the terminal box lid, secure the lid screws ⑦ with
Loctite 243 ®.
⑤
EExd-Cable screwing
⑥
Encoder Cables
⑦
Power cables
⑧
Lid screw tighten torque 6.3 Nm
⑩,⑪
Shield connection screw tighten torque 1.3 Nm
X1
Power connection
X2
Brake, temperature
X3
Encoder connector
X5
Shield connection
Fig.12-12:
Insert power and encoder cable MKE118
Bosch Rexroth AG
DOK-MOTOR*-MKE*GEN2***-PR06-EN-P
Rexroth MKE Synchronous Motors for Potentially Explosive Areas acc. to ATEX and UL/CSA
116/135
Installation
LSA Control S.L. www.lsa-control.com [email protected] (+34) 960 62 43 01
