RE 64025-B/2021-08-12, Bosch Rexroth AG
About this documentation |
Control blocks for mobile applications
7
/54
1�3 Representation of information
Uniform safety instructions, symbols, terms and abbreviations are used throughout
this documentation to ensure safe and proper use of the product. For clarification,
they are explained in the sections below.
1�3�1 Safety instructions
This documentation includes safety instructions in chapters 2.6 "Product-specific
safety instructions" on page 11 and 3 "General instructions on property damage
and product damage" on page 15, as well as prior to a sequence of actions
or instructions with risk of injury or property damage. Always follow the measures
for danger prevention associated with the use of this product.
Safety instructions are set out as follows:
SIGNAL WORD
Type and source of danger
Consequences of noncompliance
▶ Danger prevention measure
•
Warning sign:
draws attention to the danger
•
Signal word:
identifies the degree of the danger
•
Type and source of danger:
indicates the type and source of the danger
•
Consequences:
describes what occurs if safety instructions are disregarded
•
Precautions:
states how the danger can be avoided
Table 2: Hazard classes as defined in ANSI Z535�6
Warning sign, signal word
Meaning
DANGER
Identifies a dangerous situation that will result in death
or serious injury if it is not avoided.
WARNING
Identifies a dangerous situation that may result in death
or serious injury if it is not avoided.
CAUTION
Identifies a dangerous situation that may result in minor
to moderate injury if it is not avoided.
NOTICE
Property damage: The product or surrounding area may
be damaged.
