RE 64025-B/2021-08-12, Bosch Rexroth AG
General instructions on property damage and product damage |
Control blocks for mobile applications
15
/54
3 General instructions on property
damage and product damage
The following safety instructions apply for chapters 6 to 14.
NOTICE
Danger from improper handling!
Product can be damaged!
▶ Do not expose the product to any mechanical, hydraulic or electric loads
under any circumstances.
▶ Never use the product as handle or step.
▶ Do not put/place any objects on the product.
▶ Do not use sensitive assembled parts (e.g. actuation elements, sensors,
solenoids, or valves) for transporting the control block.
▶ Carefully place the control block onto the contact surface to prevent it from
being damaged and secure it against falling.
▶ Do not set/place the control block onto the actuation elements.
▶ Do not hit sensitive assembled parts (e.g. sensors, solenoids or actuation
elements).
▶ Do not hit sealing surfaces (e.g. on the work connections).
▶ Leave the protective covers on the control block until you connect the lines.
▶ Disconnect all electric connectors before any painting operations.
▶ Ensure that the electronic components (e.g. sensors) are not electro-statically
charged (e.g. during painting operations).
Risk of property damage due to inadequate lubrication!
Product can be damaged or destroyed!
▶ Always commission the control block with sufficient hydraulic fluid.
▶ When commissioning a machine/system, make sure that the housing area and
the suction and working lines of the control block are filled with hydraulic
fluid and keep them filled during operation.
Ingress of fluids and foreign particles due to lacking sealings and locks!
Loss of the protection class and danger of short circuit!
▶ Before the assembly, ensure that all sealings and locks of the plug-in
connection are tight.
