17
/20
RA 22049-VE1-B2 | M-.SED 6...VE1...
Hydraulics |
Bosch Rexroth AG
11 Repair and spare parts
11.1 Safety instructions regarding repairs
DANGER
For your safety, please observe all safety instructions
carefully and at any time.
➢
For repair works, the valve may only be disassem-
bled to the extent described in this "product-specific
instruction".
➢
Defective parts may only be replaced by new, inter-
changeable, tested components in original equip-
ment quality.
➢
Clean the external environment of fittings and
devices before the disassembly. Do not use cotton
waste for the cleaning.
➢
Close all openings using protective caps.
11.2 Repairing external leakages
External leakage at the valve connection surface can be rec-
tified on site. Other leakages have to be rectified by special-
ists of the manufacturer.
11.2.1 Repairing leakage at the valve connection
surface
1. Remove the valve, see
2. Check the seal ring recesses on the valve connection
surface for cleanliness and damage.
3. Fit the new seals.
11.3 Available spare parts
➢
NBR seal kit for the valve connection surface,
mat. no. R900075699
➢
FKM seal kit for the valve connection surface,
mat. no. R900075700
➢
Seal kit for the solenoid 45-Z2-VE1
mat. no. R961008474 contains:
1 × O-ring for adapter
1 x blind plug with O-ring
4 x hexagon socket head cap screws for the terminal box
4 x locking rings
4 x flat seals
IMPORTANT
Make sure the sealing materials are suitable for the hydrau-
lic fluid used!
See "
Data sheet".
11.4 Contacts for repair and spare parts
Bosch Rexroth AG
Service Industriehydraulik
Bürgermeister-Dr. Nebel-Str. 8
97816 Lohr am Main
Germany
Phone +49 (9352) 18-1164
Fax
+49 (9352) 18-3363
www.boschrexroth.com/service
Summary of Contents for Rexroth M SED 6 VE1 Series
Page 2: ......
Page 37: ...19 20 RA 22049 VE1 B2 M SED 6 VE1 Hydraulics Bosch Rexroth AG ...
Page 39: ......
