●
IEC 60947-5-1/5 (Requirements for control circuit devices, requirements for
E-STOP devices)
●
ISO 13850 (Safety of machinery - E-STOP - Principles for design)
Technical data and B10d value of the E-STOP button are specified in
"E-STOP button (VEP30.5DPU...)" on page 9
.
8.2 CE Marking
8.2.1 Declaration of Conformity
The electronic products described in the present operating instruction comply
with the requirements and the target of the following EU directive and with the
following harmonized European standards:
EMC Directive 2004/108/EC
The electronic products described in the present operating instruction are inten-
ded for use in industrial environments and comply with the following require-
ments:
Standard
Title
Edition
DIN EN 61000-6-4
(VDE 0839-6-4)
Electromagnetic Compatibility (EMC)
Part: 6-4: Generic standards – Emission standard for indus-
trial environments (IEC 61000-6-4:2006)
September 2007
DIN EN 61000-6-2
(VDE 0839-6-2)
Electromagnetic Compatibility (EMC)
Part: 6-2: Generic standards – Noise immunity for industrial
environments (IEC 61000-6-2:2005)
March 2006
Tab. 8-2: Standards for electromagnetic compatibility (EMC)
Non-compliance with CE conformity due to modifications at the de-
vice.
The CE marking is only valid for the device in its delivery state. After
modifying the device, verify CE conformity.
Ask your representative for the Declaration of Conformity.
8.3 UL/CSA certified
The devices are certified according to
●
UL508 (Industrial Control Equipment) and
●
C22.2 no. 142-M1987 (CSA)
Embedded Terminals with Profibus DP
Master
Bosch Rexroth AG
Standards
DOK-CONTRL-VEP*XX.5***-IT01-EN-P
11/41