1
About this Documentation
Overview – target groups and product phases
The activities, product phases and target groups that refer to the present documenta‐
tion are marked in red color in the following figure.
Example: In the product phase "Mounting (assembly/installation)", the "mechanic/elec‐
trician" can execute the activity "install" using this documentation.
Selection
En g in e e rin g
Design engineer
Mechanic/
electrician
S e rvic e
P re s a le s Afte rs a le s
Mounting
Product
phases
Target
groups
Activities
(assembly/installation)
Commissioning
Operation
De-
commissioning
Programmer
Technologist
Process
specialist
Programmer
Commissioning engineer
Technologist
Process specialist
Machine
operator
Maintenance
technician
Mechanic/
electrician
Disposal company
To select
To prepare
To design
To construct
To unpack
To mount
To install
To parameterize
To program
To configure
To simulate
To optimize
To test
To operate
To maintain
To remove
faults
To create
the NC program
To dismount
To dispose
Fig.1-1: Assigning the present documentation to the target groups, product phases
and activities of the target group
Purpose
This document instructs the technical staff of the machine manufacturer on how to per‐
form the mechanic and electrical installation in a safe way and on how to commission
the panel PC.
Required qualifications: Individual who is able to assess the tasks assigned and identify
possible safety risks owing to qualification in the subject, knowledge and experience.
The individual should also be familiar with the standards and regulations.
DOK-SUPPL*-VSP*XX.3***-IT01-EN-P
Rexroth IndraControl VSP xx.3 Panel PC
Bosch Rexroth AG
About this Documentation
5/43
