Loss of degree of protection IP 65!
The housing in which the operating display is installed, has to fulfil
the following conditions:
●
free from impurities
●
sufficient mechanical strength and flatness
These criteria influence the required degree of protection IP to a
great extent.
Further required measures are to be taken depending on the mount-
ing location, e. g. the stabilization of the mounting frame.
1. Creating a panel cut-out, see
fig. 10-6 "Assembly dimensions in millime-
.
2. Insert the operating display from the front in the cut-out until the click-in
lug at the top of the device latches in the cut-out.
1
2
①
Clamp fastenings
②
Click-in lug
Fig. 10-4: Position of clamp fastenings
3. Fold out the clamp fastenings.
Bosch Rexroth AG
Assembly, Disassembly and Electrical Installation
VDP 15.3, 18.3, 21.3 Multitouch
18/37
DOK-SUPPL*-VDPXX.3MTBU-IT02-EN-P
