5-8
Instructions for Use
Rexroth EcoDrive 03 DKC**.3-016
DOK-ECODR3-DKC16*UL***-IB01-EN-P
Mains connections
The mains connector serves as the connection of the drive controller with
the power supply.
AP5399f1.FH7
L1
L2
L3
L1
N
n.c.
device-external
device-internal
X5
Fig. 5-16:
Single-phase mains connection
AP5400f1.FH7
X5
L1
L2
L3
L1
L2
L3
device-external
device-internal
Fig. 5-17:
Three-phase mains connection
Note:
Mains connections should not be daisy-chained between the
units (intermediate connectors for the supply source should be
used).
XE2
X6, Motor temperature monitoring and holding brakes
Technical description of connector
Ap5382f1.FH7
123
456
Fig. 5-18:
Connector X6
Type
No. of pins
Design
Spring contact
2 x 3
Bushing on connector
Fig. 5-19:
Design
Cross section
single wire
[mm²]
Cross section
multi core wire
[mm²]
Wire size
in AWG
Gauge no.:
0.2-2.5
1.5-2.5
16-12
Fig. 5-20:
Connection cross section
Single-phase mains connection:
Three-phase mains connection:
Protective conductor connection
Illustration:
Design:
Connection cross section:
