Bosch Rexroth AG, RE 91485-01-B/2021-11-18
30
/72
A10FZO, A10VZO, A10FZG and A10VZG series 10
| Transport and storage
The following instructions only refer to axial piston units operated with
hydraulic fluid on a mineral oil basis. Other hydraulic fluids require other
specific preservation measures. In such a case, consult your local contact
person; you can find their contact information at
https://addresses.boschrexroth.com
Bosch Rexroth recommends the following procedure:
1�
Clean the axial piston unit; see chapter 10.1 "Cleaning and care" on page 58.
2�
Drain the axial piston unit.
3�
For storage times up to 12 months: Moisten the inside of the axial piston unit
with mineral oil and fill with approx. 100 ml mineral oil.
For storage times up to 24 months: Fill the axial piston unit with VCI 329
corrosion protection (20 ml).
Filling is carried out via drain port
L
,
L
1
or
L
2
, see chapters 7.5
"Installing the axial piston unit", Abb. 27 to Abb. 30 starting on page 48.
4�
Plug all ports so they are airtight.
5�
Coat unpainted areas of the axial piston unit with mineral oil or suitable,
easily removable corrosion protection, e.g. acid-free grease.
6�
Pack the axial piston unit with desiccant in an airproof manner in corrosion
protection film.
7�
Store the axial piston unit in a shock-proof manner; see "Requirement"
on page 28 in this chapter.
