English– 7
1 609 929 J60 • (05.12) PS
41
Table stand *
42
"Table stand" attachment set *
43
Winged nut for clamping the saw table extension
44
Quick action clamp
45
Quick release
46
Tightening knob for the quick action clamp
47
Winged nut of the quick action clamp
48
Locking tab
49
Angle indicator (horizontal)
50
Angle indicator (vertical)
51
Power Light lighting unit
52
Winged nut for the clamping of the length stop
53
Screws of the table insert
54
Spindle lock
55
Socket head screw for attaching the saw blade
56
Clamping flange
57
Tool spindle
58
Scale for the bevel angle (vertical)
59
Screw of the angle indicator (vertical)
59
Screw of the angle indicator (horizontal)
61
Protective dust cover
* Not included with all machine versions
Not all the accessories illustrated or described are in?
cluded in standard delivery.
4
MOUNTING
Avoid unintentional starting of the power
tool. During mounting and for all work on
the power tool itself, the main plug must
not be connected to the power source.
Items Included
Also see the illustration of the delivered
items at the beginning of the operating
instructions.
Before putting the power tool into operation, check
that all of the items listed below have been delivered:
–
Compound mitre saw with fitted saw blade
–
Dust bag
20
–
Locking knob
12
–
2 Extension hoops
6
–
"Extension hoop" attachment set
39
(2 U6profiles with screws)
–
Sliding saw table extension
5
–
Length stop
38
–
Quick action clamp
44
–
Allen key / Phillips screwdriver
29
–
3 Batteries (size AAA, 1.5 V)
–
Protective dust cover
61
For machine versions with table stand:
–
Table stand
41
(16 profiles, 4 caps)
–
"Table stand" attachment set
42
(24 screws with nuts for assembly, 4 screws with
nuts for attachment to the power tool, 4 washers)
Check the power tool for possible damage.
Before further use of the power tool, check that all the
protective devices are fully functional. Any lightly dam6
aged parts must be carefully checked to ensure flaw6
less operation of the tool. All parts must be properly
mounted and all conditions fulfilled that ensure fault6
less operation.
Damaged protective devices and parts must be imme6
diately replaced by an authorised service centre.
Initial Operation
Remove all parts supplied carefully from the packag6
ing.
Remove all packing material from the power tool and
the accessories provided.
To facilitate the work while mounting the machine ele6
ments provided, observe that the power tool is in the
transport position.
Tools Required in Addition to those
Delivered
–
Phillips screwdriver
–
Combination square
–
Ring or open6ended spanner (12 mm)
for assembling the table stand
–
Ring or open6ended spanner (10 mm)
for the basic adjustment of the bevel angle (vertical)
PCM10_WEU.book Seite 7 Donnerstag, 1. Dezember 2005 9:16 09
