en
|
1 6
| User guide |
OBD 1350
ProGrade OBDII Scan Tool
580001 | REV. A | 11.2016
System Setup
Quick Test
Print Header
Language Setup
Long PID Names
Pre-Trigger Setup
Tool Information
Display Test
Keypad Test
Memory Test
2. Press a key.
•
Key name or scroll direction should inverse
colors on display.
•
will return the tool to the
System Setup
screen.
Keypad Test
Press BACK to exit
BACK
ENTER
CODE
F3
F4
F2
F1
Memory Test
The
Memory Test
will test RAM and flash ROM. Run the
Memory Test
if the tool has trouble:
•
Playing back recorded data.
•
Displaying trouble code definitions.
From
System Setup
screen:
1. Select
Memory Test
.
•
Use the
UP
and
DOWN
keys until
Memory
Test
is highlighted.
•
Press
.
System Setup
Print Header
Language Setup
Long PID Names
Pre-Trigger Setup
Tool Information
Display Test
Keypad Test
Memory Test
Program Mode
•
Memory Test
may take several minutes to com-
plete.
•
Memory Test
results display:
–
If no problems were detected, then
“Passed” is displayed.
–
If RAM fails, an error message is shown.
–
If FLASH fails, a checksum is shown.
Memory Test
INT RAM
INT FLASH
Passed
10ca
Press BACK to exit
2. Return to
System Setup
menu.
•
Press
.
Program Mode
The
Program Mode
is used for updating the scan tool.
Instructions are provided with upgrades. Refer to “3.2
Download Scanning Suite” on page 8.
System Setup
Print Header
Language Setup
Long PID Names
Pre-Trigger Setup
Tool Information
Display Test
Keypad Test
Memory Test
Program Mode
PROGRAM MODE
See User Manual
Connect Tool to PC
with USB Cable
•
If the
Program Mode
is entered,
is not opera-
tional. The tool must be powered off to exit
Pro-
gram Mode
and then restarted to continue.
4.6
Vehicle-Specific Features
Review Data
The
Review Data
function allows the user to view the
information from the previous vehicle tested. The scan
tool can be powered from vehicle or PC using USB to
use the
Review Data
function.
