15
Bowl and tools
en
Attention!
Use bowl with this appliance only.
Professional flexi stirring
whisk (13)
for stiring mixtures, e.g. cake
mixture, fruit cake, … and folding in ingredi-
ents such as raisins and chocolate chips
Professional beating whisk (14)
for whisking egg whites and cream
(min. 30 % fat content) and for
mixing sponge mixture
Kneading hook (15)
for kneading dough e.g. yeast
dough, bread dough, pizza dough,
pasta dough, pastry and folding in ingre-
dients such as seeds into the dough
Important information concerning
the use of the whisk
Figure
D
:
The whisk should almost touch the bottom
of the bowl to ensure that the ingredients are
optimally mixed. If not, adjust the height of
the whisk as follows:
■
Remove mains plug.
■
Press the Release button and
move the swivel arm to
position
2
.
■
Insert the whisk into the drive
until the whisk locks into position.
■
Hold whisk in place and loosen nut
clockwise using open-ended wrench
(size 8).
■
Set the whisk to the optimum height by
rotating the whisk:
– Turn clockwise: Raise
– Turn anti-clockwise: Lower
■
Press the Release button and
move the swivel arm to
position
1
.
■
Check the height of the whisk
and, if required, correct.
■
When the height has been set
correctly, press Release button
and move the swivel arm to
position
2
.
■
Hold whisk in place and tighten nut
anticlockwise using open-ended wrench
(size 8).
Working with the bowl and the
tools
Figure
E
:
■
Press the Release button and
move the swivel arm to
position
2
.
■
Insert the bowl:
– Tilt the bowl forwards and then set it
down.
– Turn anti-clockwise until it locks into
place.
■
Depending on the processing task, insert
the stirrer, whisk or kneading hook until it
locks into position.
Note:
If using the kneading hook, rotate the dough
deflector until the kneading hook can lock
into position
(Fig.
E
-4b)
.
■
Put the ingredients to be processed into
the bowl.
■
Press the Release button and
move the swivel arm to
position
1
.
■
Attach the cover.
■
Set the rotary switch to the desired
setting.
Adding more ingredients
■
Switch off the appliance with the rotary
switch.
■
Add more ingredients through the feed
tube in the cover.
or
■
Remove lid.
■
Press the Release button and
move the swivel arm to
position
2
.
■
Add ingredients.
After using the appliance
■
Switch off the appliance with the rotary
switch.
■
Remove mains plug.
■
Remove lid.
■
Press the Release button and
move the swivel arm to
position
2
.
