MIYN46 Wall Transmitter
Installation | en
13
Bosch Security Systems
User Manual US
970.035b | F.01U.278.521 | v2.0 | 2012.12
4.2.7
Replacing the battery
Procedure
1.
Open the compartment cover (1) by sliding it downwards and then towards you.
2.
Carefully remove the used battery (2).
3.
Place the new battery. The positive terminal must be facing you.
4.
Replace the compartment cover.
Fig. 4.1
Replacing the battery
!
WARNING!
–
May explode if exposed to fire;
–
Use only original batteries intended for use with your MIYN46 Wall Transmitter. Using
other type of batteries could be dangerous;
–
Do not expose the battery to liquids;
–
Do not let the metal contacts on the battery touch another metal. This could damage the
battery;
–
Do not disassemble or modify the battery;
–
Do not expose the battery to extreme temperatures, and never above 60 ºC (+140 ºF).
–
For maximum battery capacity, use the battery at room temperature;
–
Keep out of reach of children;
–
Use the battery for the intended purpose only;
–
Do not allow the battery to be put into the mouth. Battery electrolytes may be toxic if
swallowed.
!
CAUTION!
There is a risk of explosion if battery is replaced by a wrong type or if not connected correctly.
The battery should be replaced exclusively by Authorized Personnel.
Dispose of used batteries according to instructions and regulations.
Battery type is 3V CR2450/DL2450.
2
1
