manualshive.com logo in svg

Bosch MIC Series 550, User Manual

Share
Download
Bosch MIC Series 550 User Manual Download Page 46

 

 

   

Outputs Setup...

   

5. NONE

 

   

6. NONE

 

   

7. NONE

 

   

8. NONE

 

   

9. NONE

 

   

10. NONE

 

   

11. NONE

 

   

12. NONE

 

   

 

 

   

Focus / Iris: Select Type

   

Right / Left: Select Mode

   

Outputs Setup Submenu Choices:
 
Outputs Setup
Defines physical outputs and keyboard commands for use in a rule.
 
Outputs 1–2
Defines a physical output: N.O. (Normally Open circuit) (default setting) or N.C. (Normally
closed circuit).
 
Outputs 3–12
Defines a command output for use in a rule.

Option Description

None

(Default setting) No command defined.

Aux On Responds to a keyboard ON command.

Aux Off Responds to a keyboard OFF command.

Shot

Responds to a Preset shot.

OSD

Displays the output on the on-screen display.

Transmi
t

Transmits a message back to the head end (available with RS-232 serial and
Bilinx connections).

NONE

(Default setting) No command defined.

Rule Setup Submenu

Notice!
You can program a total of twelve rules. You must define the inputs and outputs before you
program a rule. See Alarm Setup, page 44, to configure alarm inputs and outputs.

46

en | On-Screen Display (OSD) Menus (Bosch Protocol)

MIC Series 550

November 2011 | | F.01U.239.454

Operation Manual

Bosch Security Systems, Inc.

Summary of Contents for MIC Series 550











































































Reviews:

No comments

Brands by name

Popular brands

Load more brands