OFF or AUX OFF
SET or SET SHOT
SHOT or SHOW SHOT
Notice!
The convention used for control key commands in this manual is ON, OFF, SET, and SHOT.
Refer to your keyboard manual for the key naming conventions.
–
Command numbers range from 1 to 999. See Keyboard Commands (Bosch Protocol) By
Number, page 69 for a complete list of keyboard commands for Bosch protocol.
–
The Enter key can also be labeled with the ∞ symbol.
For example, the keyboard command to make the camera pan 360º continuously is:
ON-1-ENTER (Press the ON key, then press the number 1 key, and then press ENTER.)
Refer to Keyboard Commands (Bosch Protocol) By Number for a complete list of commands.
Keyboard Commands, Pelco Protocol
Pelco control commands are composed of a sequence of two (2) keyboard inputs with the
following convention: 1) a Command Number and 2) a Function key input.
The camera uses the PRESET command key to save and recall presets (pre-positions) 1
through 99.
Notice!
To save a preset, enter the desired number and hold the PRESET key for approximately two
(2) seconds. To recall a preset, enter the desired preset number (or command) and
momentarily press and release the PRESET key.
Keyboard Command User Action
Description
0-Pattern
Press
Initiates recording continuous playback based upon
current Recording setting (A or B) in the Setup
Menu.
Press and hold Initiates recording based upon current Recording
setting (A or B) in the Setup Menu. Press ACK to
end recording.
1-Pattern
Press
Initiate Recording A continuous playback.
Press and hold Initiate Recording A. Press ACK to end recording.
2-Pattern
Press
Initiate Recording B continuous playback.
Press and hold Initiate Recording B. Press ACK to end recording.
3-Pattern
Press
Initiate the standard preset tour (Tour 1).
4-Pattern
Press
Initiate the custom preset tour (Tour 2).
1 – Aux On / Aux
Off
Press
Activates / deactivates alarm output 1.
This command is supported with Non-IR models
only if an optional 8-input alarm card is installed in
the PSU powering the camera.
12.3.4
32
en | Getting Started
MIC Series 550
November 2011 | | F.01U.239.454
Operation Manual
Bosch Security Systems, Inc.
