manualshive.com logo in svg

Bosch MIC Series 550, User Manual

Share
Download
Bosch MIC Series 550 User Manual Download Page 33

Keyboard Command User Action

Description

2 – Aux On / Aux
Off

Press

Activates / deactivates alarm output 2.
This command is supported with Non-IR models
only if an optional 8-input alarm card is installed in
the PSU powering the camera.

91 – Aux On

Press

Activate Zone Scan (display zone titles).

92 – Aux On

Press

Deactivate Zone Scan (re-move zone titles)

Special Preset Commands, Pelco Protocol

Some Pelco mode preset commands have a special meaning and override the normal Pelco
preset function as follows:

Preset Command Description

33-PRESET

Pans the camera 180° (Flip).

34-PRESET

Goes to Zero Pan (original home position).

80-PRESET

Toggles the Synchronization Mode between Line Lock and Internal
(Pelco Frame Scan). This command is available if commands are
unlocked using the Main menu.

81-PRESET

Initiates Preset Tour 1.

82-PRESET

Initiates Preset Tour 2.

92-PRESET

Sets the Left pan limit for an AutoScan with Limit Stops enabled.

93-PRESET

Sets the Right pan limit for an AutoScan with Limit Stops enabled.

94-PRESET

Initiates a Preset Tour.

95-PRESET

Enables or disables Limit Stops in the Setup Menu for AutoScan.
Invokes the Pelco main Setup Menu when pressed for 2 seconds.

96-PRESET

Stops a scan.

97-PRESET

Initiates FastAddress (Pelco Random Scan).

98-PRESET

Toggles the Synch. Mode between Line Lock and Internal (Pelco
Frame Scan). This command is available only for two (2) minutes after
the power is applied and then reverts to normal preset functionality.

99-PRESET

Starts an AutoScan.

Notice!
Some Pelco controllers do not support all of the preset command numbers. Refer to the
documentation of the specific Pelco controller for supported preset commands.

12.3.5

MIC Series 550

Getting Started | en

33

Bosch Security Systems, Inc.

Operation Manual

November 2011 | | F.01U.239.454

Summary of Contents for MIC Series 550











































































Reviews:

No comments

Brands by name

Popular brands

Load more brands