en
32
Fault
Possible cause
Remedial action
The cool-fresh
compartment is too
warm or too cold.
The fixed setting has
been set too high
or too low (e.g. if there
is frost in the “cool-
fresh” compartment).
The temperature in the cool-fresh
compartment can be set warmer
and/or colder.
Setting the temperature:
Fig.
2
1. Switch off the appliance with
the On/Off button 1.
2. Simultaneously hold down On/Off
button 1 and temperature setting
button 2 for approx. 2 seconds.
“88” is lit on temperature
display 4. When the temperature
display goes out, release buttons.
3. The temperature levels appear
on the temperature display 4.
Temperature levels:
■
Setting 0 – coldest setting
■
Setting 6 – warmest setting
■
Setting 4 – factory setting
(almost 0 °C)
4. Keep pressing temperature
setting button 2 until the required
temperature level is displayed.
The set temperature is saved after
one minute. The display switches
to the set refrigerator compartment
temperature.
Notes
■
The numbers on the display do not
correspond to °C temperatures
in the “cool-fresh” compartment.
■
If the temperature display is not flashing,
the buttons were inadvertently pressed
for longer. Switch off the appliance again
and repeat the process as described
above.
