en
43
Ethylene absorber
Note
For important safety instructions and
information about installation and use,
see the enclosed installation and
operating instructions for the ethylene
absorber.
The ethylene absorber slows down
ripening of ethylene-sensitive fruit and
vegetables to keep them fresher for
longer.
1. Insert the timer in the housing at the
front and push in the timer button.
The timer is now activated for
6 months.
2. Remove both sachets from the
packaging and insert them inside in
the holders on the rear of the housing.
Note
Do not open the sachets.
3. Stick an adhesive strip in the external
pre-assembled holder and secure the
ethylene absorber on the side in the
upper section of the vegetable
container.
Both sachets and the timer must be
replaced every 6 months after activation.
Spare parts sets with sachets and timers
can be purchased from Customer
Service or the company website.
Sticker “OK”
(not all models)
The sticker “OK” lets you check whether
the refrigerator compartment achieves
the safe temperature ranges of +4 °C or
colder recommended for food. If the
sticker does not indicate “OK”, gradually
reduce the temperature.
Note
When the appliance is switched on, it
may take up to 12 hours until the set
temperature is reached.
Correct setting
Switching off and
disconnecting the
appliance
Switching off the appliance
Press "+" button for 10 seconds.
The refrigeration unit switches off.
Press "+" button for 10 seconds to switch
on the refrigeration unit again.
Disconnecting the appliance
If you do not use the appliance for
a prolonged period:
1. Pull out the mains plug or switch off
the fuse.
2. Clean the appliance.
3. Leave appliance doors open.
Summary of Contents for KDD Series
Page 132: ... ...
Page 133: ... ...
Page 134: ... 1 3 2 4 5 1 2 3 5 4 ...
