Bosch KALKHOFF PERFORMANCE, Original User Manual

Page: 60 / 103

Error Code Indication
The components of the eBike system are continuously and
automatically monitored. If an error is detected, the corre-
sponding error code will appear in the speed indication
a
.
Depending on the type of error, the drive unit is automatically
shut off, if required. Continued travel without assistance from
the drive unit is possible at any time. However, have the eBike
checked before attempting new trips.
 Have all repairs performed only by an authorised bike
dealer.
Code Cause Corrective Measure
410 One or more buttons of the on-board
computer are blocked. Check if any buttons are blocked, e.g. from dirt or debris. Clean the
buttons, if required.
414 Connection problem of the operating
unit Have connections and contacts checked.
418 One or more buttons of the operating
unit are blocked. Check if any buttons are blocked, e.g. from dirt or debris. Clean the
buttons, if required.
419 Configuration error Restart the system. If the problem persists, contact your Bosch eBike
dealer.
422 Connection problem of the drive unit Have connections and contacts checked.
423 Connection problem of the eBike
battery pack Have connections and contacts checked.
424 Communication error among the
components Have connections and contacts checked.
426 Internal time-out error Restart the system. If the problem persists, contact your Bosch eBike
dealer. In this error status, it is not possible to display or adjust the wheel
circumference in the basic settings menu.
430 Internal battery pack of the on-board
computer is empty. Charge the on-board computer (in the holder or via the USB port).
431 Software version error Restart the system. If the problem persists, contact your Bosch eBike
dealer.
440 Internal error of the drive unit Restart the system. If the problem persists, contact your Bosch eBike
dealer.
450 Internal software error Restart the system. If the problem persists, contact your Bosch eBike
dealer.
460 Error at USB connection Remove the cable from the USB connection of the on-board computer. If
the problem persists, contact your Bosch eBike dealer.
490 Internal error of the on-board
computer Have the on-board computer checked.
500 Internal error of the drive unit Restart the system. If the problem persists, contact your Bosch eBike
dealer.
502 Bike lighting error Check the light and the associated wiring. Restart the system. If the
problem persists, contact your Bosch eBike dealer.
503 Error of the speed sensor Restart the system. If the problem persists, contact your Bosch eBike
dealer.
510 Internal sensor error Restart the system. If the problem persists, contact your Bosch eBike
dealer.
511 Internal error of the drive unit Restart the system. If the problem persists, contact your Bosch eBike
dealer.
530 Battery pack error Switch off the eBike, remove the eBike battery pack and reinsert the
eBike battery pack. Restart the system. If the problem persists, contact
your Bosch eBike dealer.
OBJ_BUCH-2819-002.book Page 4 Monday, May 22, 2017 11:27 AM
59