K2200 Series |
User Guide | 3.0
Administering the System
EN
| 15
Bosch Security Systems | 7/03 | 17376 v1.1 / 47491C
Figure 5:
Editor Example
ID 1 AC 1
ID 2 AC 0
ID 3 AC 0
ID 4 AC 0
ID 3999 AC 0
ID 4000 AC 0
WHO _
WHO _
WHO _
WHO _
WHO _
WHO _
ID 1 HOLS 0
ID 2 HOLS 0
ID 3 HOLS 0
ID 4 HOLS 0
ID 3999 HOLS 0
ID 4000 HOLS 0
(Up)
(Down)
(Left)
(Right)
Alphanumeric Keys
These are the keys [A]-[Z], [0]-[9] and [
SPC]
, which
take up most of the keyboard. You use these for
entering names or values when prompted. Normally
you will not be allowed to enter characters ([A]-[Z] or
[
SPC]
) when a numeric value, such as an access code
or lock release time is required.
When you enter any name or value, you
should always press [ENT] before moving
on to the next prompt. If you do not press
[ENT], the name or value you entered will
be lost and the contents of the field will
revert to their previous value
Making Changes
When a field is visible on the screen, the flashing
underline cursor will appear on the first character.
The cursor is always positioned on the next character
to be changed. You can use the following keys to
move and alter the display (see
Table 9
).
Table 9: Display Altering Keys
Key
Name
Description
Left and
Right
Arrows
The left and right arrow keys
move the cursor to the left
and right within the field. The
cursor always starts on the
leftmost character of the field
and returns to that position
when you press ENT
Clear
The
CLR
(clear) key will blank
out the existing value. This is
convenient especially when
changing long names. If you
press
CLR
followed by
ENT
,
numeric values will be set to
0
and alphabetic values set to
all spaces.
The next example shows how to make changes to
items. Most data items fall into 3 different categories:
•
Alphanumeric
•
Numeric
•
Options
Alphanumeric
These are names given to personnel, editors, doors
etc. You may use any of the alphanumeric characters
(A-Z, 0-9) including SPC (space.)
1.
Once you have selected a field to change, use the
alphanumeric keys to enter a new value.
