manualshive.com logo in svg

Bosch INT-TX04, Operation Manual, Page: 9 / 94

Share
Download
Bosch INT-TX04 Operation Manual Download Page 9

System Overview

System Overview

Integrus is a system for wireless distribution of audio signals via infrared radiation. It can be
used in a simultaneous interpretation system for international conferences where multiple
languages are used. To enable all participants to understand the discussion, interpreters
simultaneously translate the speaker's language as required. These interpretations are
distributed throughout the conference venue, and delegates select the language of their
choice and listen to it through headphones. The Integrus system can also be used for music
distribution (mono as well as stereo).

Figure 3.1: Integrus system overview (with DCN-system as input)

 
The Integrus Language Distribution System comprises one or more of the following:
 
Infrared transmitter
The transmitter is the core of the Integrus system. Four types are available:
–

INT‑TX04 with inputs for 4 audio channels

–

INT‑TX08 with inputs for 8 audio channels

–

INT‑TX16 with inputs for 16 audio channels

–

INT‑TX32 with inputs for 32 audio channels

The transmitter can be directly connected to the DCN Next Generation conference system
(see section Connection, page 42).

 

3

3.1

Language Distribution System

System Overview | en

9

Bosch Security Systems B.V.

Operation manual

2013.11 | V1.4 |

Summary of Contents for INT-TX04































































































Reviews:

No comments