manualshive.com logo in svg

Bosch INT-TX04, Operation Manual, Page: 58 / 94

Share
Download
Bosch INT-TX04 Operation Manual Download Page 58

Menu Item

Options

Value

Description

 

 

-6 ... +6 dB

Set the required sensitivity for the right
auxiliary input.

4L Level Inputs Mode:

Level:

 

 

- All

-6 ... +6 dB

Set the sensitivity of all audio inputs to a user
defined level.

 

- Per Input ...  

Select this option to go to the ‘Per Input
Sensitivity Settings’ menu.

The sensitivity screens also displays a level meter for a visual indication of the actual signal
strength:  = low level,  = high level,  = overflow.

Enable / disable IR-monitoring (4M)

The mini IR-radiator at the front of the transmitter can be used for monitoring the IR-signal.
When required (e.g. for security reasons) this option can be switched off (menu 4M).

Menu Item

Options

Description

4M Mini Radiator

Enabled

Enable the mini IR-radiator at the front of the
transmitter.

 

Disabled

Disable the mini IR-radiator at the front of the
transmitter.

Notice!
The mini IR-radiator and the headphone output can also be permanently disabled by removing
two resistors. Consult your regular service contact for more information.

Enable / disable headphone output (4N)

The headphone output at the front of the transmitter can be used for monitoring the input-and
channel signals. When required (e.g. for security reasons) this option can be switched off in
menu item 4N.

Menu Item

Options

Description

4N Headphone

Enabled

Enable the headphone output at the front of
the transmitter.

 

Disabled

Disable the headphone output at the front of
the transmitter.

Choose transmitter name (4O)

The transmitter can be assigned a user-defined name. This name is used in the Transmitter
Status screen. The name can be edited in the Unit Name menu (4O).

Menu Item

Options

Description

4O Unit Name

Name:

 

 

- Free text

Assign a user defined name to the transmitter
(max. 16 characters). The default name is
‘Transmitter’.

7.2.12

7.2.13

7.2.14

58

en | Configuration

Language Distribution System

2013.11 | V1.4 |

Operation manual

Bosch Security Systems B.V.

Summary of Contents for INT-TX04































































































Reviews:

No comments