manualshive.com logo in svg

Bosch INT-TX04, Operation Manual, Page: 7 / 94

Share
Download
Bosch INT-TX04 Operation Manual Download Page 7

About this manual

Purpose

The purpose of this document is to provide information required for installing, configuring,
operating, maintaining and troubleshooting an Integrus Language Distribution System.

Intended audience

This document is intended for installers and users of an Integrus Language Distribution
System.

Related documentation

–

DCN Next Generation operation manual. Refer to the product related information at:
www.boschsecurity.com

Alerts and notice signs

Four types of signs can be used in this manual. The type is closely related to the effect that
may be caused if it is not observed. These signs - from least severe effect to most severe
effect - are:

Notice!
Containing additional information. Usually, not observing a ‘notice’ does not result in damage
to the equipment or personal injuries.

!

Caution!
The equipment or the property can be damaged, or persons can be lightly injured if the alert
is not observed.

!

Warning!
The equipment or the property can be seriously damaged, or persons can be severely injured
if the alert is not observed.

Danger!
Not observing the alert can lead to severe injuries or death.

Copyright and disclaimer

All rights reserved. No part of this document may be reproduced or transmitted in any form by
any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior
written permission of the publisher. For information on getting permission for reprints and
excerpts, contact Bosch Security Systems B.V..
The content and illustrations are subject to change without prior notice.

2

2.1

2.2

2.3

2.4

2.5

Language Distribution System

About this manual | en

7

Bosch Security Systems B.V.

Operation manual

2013.11 | V1.4 |

Summary of Contents for INT-TX04































































































Reviews:

No comments