Getting to know your appliance
en
13
Note:
For each heating function, the appliance specifies
a default temperature or level. You can accept this
value or change it in the appropriate area.
Other functions
Your new oven has yet more functions; see below for a
brief description of these.
--------
Temperature
Use the temperature selector to set the temperature in
the cooking compartment. It can also be used to select
the grill and cleaning settings, for example.
The settings will appear on the display.
Notes
■
The temperature can be set in 1 degree increments
up to 100 °C, and in 5 degree increments thereafter.
■
When cooking at very high temperatures, the
appliance lowers the temperature slightly after an
extended period.
Temperature indicator
The line at the bottom of the display turns red from left
to right as the cooking compartment heats up.
When you are preheating the appliance, the optimal
time to place your food in the cooking compartment is
as soon as the entire line has turned red.
Residual heat
When the appliance is switched off, the temperature
indicator shows the residual heat in the cooking
compartment. The lower the temperature drops, the
shorter the line.
Notes
■
The temperature indicator only shows the increasing
temperature for heating functions for which a
temperature is set. For grill settings, for example, the
indicator shows a full line from the beginning.
■
If the temperature in the cooking compartment is too
high when the appliance is started,
œ
will appear on
the display for some heating functions. Switch off the
appliance and allow it to cool down before switching
it back on again.
■
Due to thermal inertia, the actual temperature inside
the cooking compartment may differ slightly from the
temperature that is displayed.
Hotplate controls
You can use the four hotplate controls to control the
heat output provided by each hotplate.
When you switch on a hotplate, the indicator lamp lights
up.
Cooking compartment
Various functions in the cooking compartment make
your appliance easier to use. For example, the cooking
compartment is well lit and a cooling fan prevents the
appliance from overheating.
Opening the appliance door
If you open the appliance door when the appliance is in
operation, the appliance will continue to operate as
before.
Interior lighting
With most heating functions and other functions, the
interior lighting in the cooking compartment will remain
lit while the oven is in operation. Once the oven has
finished cooking the food, the lighting will go out.
By pressing the button for the interior lighting, you can
switch on the lighting without heating the oven. This
makes it easier to clean your appliance, for example.
Cooling fan
The cooling fan switches on and off as required. The
hot air escapes above the door.
Caution!
Do not cover the ventilation slots. Otherwise, the
appliance may overheat.
So that the cooking compartment cools down more
quickly after operation, the cooling fan continues to run
for a certain period afterwards.
Function
Use
%
Programmes
For many types of food, the appliance has preprogrammed setting values that you can
use.
~
"Programmes" on page 31
q
Pyrolytic self-cleaning
The pyrolytic self-cleaning function cleans the cooking compartment almost by itself.
~
"Cleaning function" on page 25
Setting
Meaning
ý
Off position
The hotplate is switched off.
1-9 Heat settings
1 = lowest output
9 = highest output
î
Activation
Switches on the extended cooking
zone
ð
Activation
Switches on the large dual-circuit hot-
plate
