English 17
3. Check that markings in cabinet line up with ducting coming
from downdraft.
4. Remove downdraft housing from cabinet.
CAUTION
Before cutting hole in cabinet for ductwork, check
for interference with loor joists, wall studs, electrical
wiring or plumbing.
5. Cut ductwork hole in cabinet - as well as holes in wall or
loor a necessary.
Mount downdraft in cabinet
1. Set downdraft into cabinet/countertop opening as far back
as possible and make sure it is level.
(2) #10 X 0.500
(12.7mm)
WOOD SCREW
HEX
SCREW
SUPPORT
LEG
2. Extend support legs and attach to bottom of cabinet with
(2) screws through each leg. Tighten hex screws.
If cabinet bottom is removed: Use blocks as spacers
between loor and support legs.
(2) #10 X 0.500 (12.7mm)
WOOD
SCREWS
UPPER
SUPPORT
BRACKET
3. Extend upper support brackets and attach to sides of
cabinet with (2) screws through each bracket.
Installations using lexible blower only:
4. Extend blower support legs and secure them to bottom
of cabinet with a screw through each bracket. Tighten (4)
bolts to secure legs to lex blower.
(4)
BOLTS
FLEXIBLE
BLOWER
INSTALLATION
