English 15
A -
Installation using lexible blower
attached to downdraft
(Purchase Model DHG602DUC Flexible Blower
separately.)
1. Remove hex nuts to remove front panel cover.
2. Determine whether lex blower will discharge to the left,
right, or down.
3. If blower discharge is down,
remove (4) #8-32 hex nuts
and electrical panel.
4. Place blower over studs around front panel opening.
5. Tighten hex nuts to secure blower in place.
Based on blower and ducting option
selected, go to the relevent section:
A -
Installation using lexible blower
attached to downdraft
B - Installation using lexible or remote
blower - mounted in a remote
location - ducting through front
panel opening
C - Installation using lexible or remote
blower - mounted in a remote
location - ducting through left,
right or rear
BLOWER
SUPPORT
LEGS
(4) BOLTS
6. Remove bolts from lex blower housing. Attach blower
support legs to lex blower housing with these (4) bolts.
Do not tighten bolts at this time.
B - Installation using inline or remote
blowers - with ducting through front
panel opening
CAUTION
If lexible blower is mounted as an inline blower: Do
not use legs alone for support. It may be necessary to
add extra support for the lexible blower.
FRONT
PANEL
6" OR 8" (152MM OR 203MM)
ROUND REMOTE ROUGH-IN
PLATE (Purchase Separately)
If blower
discharge is
down,
electrical
panel must be
relocated.
1. Remove hex nuts to remove front panel cover.
2. If blower discharge is down, remove (4) #8-32 hex nuts
and electrical panel.
3.
Place 6” or 8” (152mm or 203mm) round rough-in plate
(purchase separately) over studs around front panel
opening.
4.
Tighten hex nuts to secure remote discharge plate in place.
INSTALLATION
FRONT
PANEL
FLEX
BLOWER
If blower
discharge is
down,
electrical
panel must be
relocated.
