Disposal 37/44
Type HAD...-1X/ and HAD...-2X/, RE 50150-B/10.20,
Bosch Rexroth AG
CAUTION!
Leaking residual oil during disassembly of the oil port!
Slip hazard! Health hazard! Environmental pollution!
▶
Remove leaking residual oil immediately.
▶
Wear protective gloves and safety goggles.
▶
If nevertheless hydraulic fluid comes into contact with the eyes or penetrates the
skin, please consult a doctor immediately.
The diaphragm type accumulator is now disassembled.
12 Disposal
▶
Permanently mark a diaphragm type accumulator which should no longer be
used, to prevent reuse as a pressure vessel.
For the disposal of the diaphragm type accumulator, the following instructions have
to be complied with:
▶
Drain the diaphragm type accumulator completely.
▶
Remove the gas filling screw. Also observe the procedure and safety instructions
in chapter 11.3 "Disassembly process".
12.1 Environmental protection
Careless disposal of the diaphragm type accumulator, the contained hydraulic fluid
and the packaging material may pollute the environment.
▶
Dispose of the diaphragm type accumulator and the packaging material in
accordance with the applicable national regulations in your country.
▶
Dispose of the hydraulic fluid in accordance with the currently applicable national
regulations in your country. Also observe the valid safety data sheet of the
hydraulic fluid.
13 Extension and modification
A conversion or extension of the diaphragm type accumulator is not admissible.
If any mechanical works are carried out on the diaphragm type accumulator, it must
no longer be operated.
If you undertake any extensions to or modifications of the product marketed by
Bosch Rexroth, this means you are changing the condition as supplied. Any
statements made by Bosch Rexroth regarding this product will then become invalid.
Declarations become
invalid
