manualshive.com logo in svg

Bosch HAD2,8-250-20, Operating Instructions Manual

Share
Download
Bosch HAD2,8-250-20 Operating Instructions Manual Download Page 24

24/44 Installation

Bosch Rexroth AG

, Type HAD...-1X/ and HAD...-2X/, RE 50150-B/10.20

7.4.1  Installing the diaphragm type accumulator on a block

Fig. 6: Diaphragm type accumulator installed on a block

For installing the diaphragm type accumulator on a manifold block, the following
work steps are required:

 

▶

Remove the protective cap on the fluid connection of the diaphragm type 
accumulator.

 

▶

Make sure that the fluid connection is clean and free from foreign matter.

 

▶

Ensure that the connection thread is intact.

 

▶

Check the fluid connection for available seals.

 

▶

Place the diaphragm type accumulator on the oil port.

 

▶

Manually screw the accumulator into the thread of the oil port.

 

▶

Make sure that the thread interlocks after one rotation at the latest.

 

▶

Tighten the accumulator by means of a suitable tool until it fits tightly.

The diaphragm type accumulator is now mounted.

Summary of Contents for HAD2,8-250-20













































Reviews:

No comments

Brands by name

Popular brands

Load more brands