8/44
About this documentation
Bosch Rexroth AG
, Type HAD...-1X/ and HAD...-2X/, RE 50150-B/10.20
1.3 Representation of information
Consistent safety instructions, symbols, terms and abbreviations are used in
this documentation so that you can quickly and safely work with your product.
For a better understanding, they are explained in the following sections.
1.3.1 Safety instructions
In this documentation, safety instructions are included in chapter 2.6
"Product-specific safety instructions" and in chapter 3 "General information on
damage to property and damage to the product" and whenever a sequence of
actions or instructions are explained which bear the risk of personal injury or
damage to property. The hazard avoidance measures described must be observed.
Safety instructions are set out as follows:
SIGNAL WORD
Type and source of danger!
Consequences in case of non-compliance
▶
Hazard avoidance measures
▶
<Enumeration>
•
Warning sign:
Draws attention to the danger
•
Signal word:
Identifies the degree of danger
•
Type and source of danger:
Specifies the type and source of danger
•
Consequences:
Describes the consequences of non-compliance
•
Precaution:
Specifies how the danger can be prevented
Table 2: Risk classes according to ANSI Z535.6-2006
Warning sign, signal word
Meaning
DANGER
Indicates a dangerous situation which will cause death or
severe injury if not avoided.
WARNING
Indicates a dangerous situation which may cause death or
severe injury if not avoided.
CAUTION
Indicates a dangerous situation which may cause minor or
medium (personal) injury if not avoided.
NOTICE
Damage to property: The product or the environment could
be damaged.
