manualshive.com logo in svg

Bosch HAD2,8-250-20, Operating Instructions Manual

Share
Download
Bosch HAD2,8-250-20 Operating Instructions Manual Download Page 40

40/44 

Technical data

Bosch Rexroth AG

, Type HAD...-1X/ and HAD...-2X/, RE 50150-B/10.20

Table 7: Fault table 

Fault

Possible cause

Remedy

Oil loss at interfaces to 
the outside

Incorrect order of assembly in service case

 

▶

Have the service performed by an expert only.

O-ring of the sealing is damaged and/or 
hardened due to excessive oil temperature

 

▶

Have the gas valve replaced by an expert.

 

▶

Check the oil temperature.

Oil port cracked due to non-tension-free 
assembly of the diaphragm type 
accumulator

 

▶

Assemble it de-energized.

Inadmissible environmental force effect

 

▶

Assemble free of stress.

Damage to the oil valve during transport

 

▶

Perform a visual inspection after transport.

Impossible to assemble

Wrong thread

 

▶

Replace the affected parts.

Thread damaged

 

▶

Replace the affected parts.

15 Technical data

For the admissible technical data of the diaphragm type accumulator, refer to 
data sheet 50150, see chapter 1.2 "Required and amending documentation".

The data sheet can be found on the Internet at

www.boschrexroth.com/various/utilities/mediadirectory

For further information, refer to the online product catalog
Industrial hydraulics: 

www.boschrexroth.com/ics

Summary of Contents for HAD2,8-250-20













































Reviews:

No comments

Brands by name

Popular brands

Load more brands