English |
7
formed.
Use of the power tool for operations different
from those intended could result in a hazardous situation.
Battery tool use and care
u
Recharge only with the charger specified by the manu-
facturer.
A charger that is suitable for one type of bat-
tery pack may create a risk of fire when used with another
battery pack.
u
Use power tools only with specifically designated bat-
tery packs.
Use of any other battery packs may create a
risk of injury and fire.
u
When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects, that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause burns
or a fire.
u
Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally oc-
curs, flush with water. If liquid contacts eyes, addi-
tionally seek medical help.
Liquid ejected from the bat-
tery may cause irritation or burns.
Service
u
Have your power tool serviced by a qualified repair
person using only identical replacement parts.
This
will ensure that the safety of the power tool is maintained.
Safety information for drills and screwdrivers
u
Wear ear protectors when impact drilling.
Exposure to
noise can cause hearing loss.
u
Use auxiliary handle(s), if supplied with the tool.
Loss
of control can cause personal injury.
u
Use suitable detectors to determine if there are hid-
den supply lines or contact the local utility company
for assistance.
Contact with electric cables can cause
fire and electric shock. Damaging gas lines can lead to ex-
plosion. Breaking water pipes causes property damage.
u
Hold power tool by insulated gripping surfaces when
performing an operation where the cutting accessory
or the fastener may contact hidden wiring.
Cutting ac-
cessory and fasteners contacting a "live" wire may make
exposed metal parts of the power tool "live" and could
give the operator an electric shock.
u
Hold the power tool securely.
When tightening and
loosening screws be prepared for temporarily high torque
reactions.
u
Secure the workpiece.
A workpiece clamped with
clamping devices or in a vice is held more secure than by
hand.
u
Always wait until the power tool has come to a com-
plete stop before placing it down.
The application tool
can jam and cause you to lose control of the power tool.
u
In case of damage and improper use of the battery, va-
pours may be emitted.
Ensure the area is well-ventilated
and seek medical attention should you experience any ad-
verse effects. The vapours may irritate the respiratory
system.
u
Do not open the battery.
There is a risk of short-circuit-
ing.
u
The battery can be damaged by pointed objects such
as nails or screwdrivers or by force applied externally.
An internal short circuit may occur, causing the battery to
burn, smoke, explode or overheat.
u
Only use the battery with products from the manufac-
turer.
This is the only way in which you can protect the
battery against dangerous overload.
Protect the battery against heat, e.g.
against continuous intense sunlight, fire,
water, and moisture.
There is a risk of explo-
sion.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended use
The power tool is intended for driving and loosening screws
and for drilling in wood, metal, ceramic and plastic. The GSB
is also designed for impact drilling in brick, concrete and
stone.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1)
Tool holder
(2)
Keyless chuck
(3)
Torque presetting ring
(4)
Mode selector switch (GSB 120-LI)
(5)
Gear selector switch
(6)
Rotational direction switch
(7)
Battery release button
A)
(8)
Battery
A)
(9)
Handle (insulated gripping surface)
(10)
On/off switch
(11)
“PowerLight”
(12)
Screwdriver bit
A)
(13)
Universal bit holder
A)
A)
Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Bosch Power Tools
1 609 92A 4EE | (02.10.2018)
Summary of Contents for GSR Professional 120-LI Series
Page 3: ... 3 GSB 120 LI 1 2 3 4 5 6 7 8 9 10 11 Bosch Power Tools 1 609 92A 4EE 02 10 2018 ...
Page 4: ...4 GSR 120 LI 1 2 3 5 6 7 8 9 10 11 1 609 92A 4EE 02 10 2018 Bosch Power Tools ...
Page 5: ... 5 6 6 8 7 12 12 13 A B C Bosch Power Tools 1 609 92A 4EE 02 10 2018 ...
Page 59: ... آفارسی 59 Bosch Power Tools 1 609 92A 4EE 02 10 2018 ...
