English |
9
Bosch Power Tools
3 609 929 C35 | (18.1.12)
Machine-specific Safety Warnings
f
Do not use the power tool for explosive materials (e. g.,
easily inflammable solvents).
Power tools produce
sparks which could ignite developing vapours.
f
In case the power tool should fall into the material to be
stirred, pull the plug immediately and have the power
tool checked by an after-sales service agent.
Material
that has penetrated the power tool can cause damage and
lead to an electric shock.
f
Always use the auxiliary handle provided with the pow-
er tool.
Loss of control can lead to injury.
f
When working with the machine, always hold it firmly
with both hands and provide for a secure stance.
The
power tool is guided more secure with both hands.
Products sold in GB only
: Your product is fitted with an
BS 1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an author-
ised customer service agent. The replacement plug should
have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains sock-
et elsewhere.
Products sold in AUS and NZ only
: Use a residual current de-
vice (RCD) with a rated residual current of 30 mA or less.
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions.
Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
Intended Use
The machine is intended for mixing pulverised building mate-
rials such as mortar, plaster, adhesives, as well as solvent-
free paint, varnish and similar substances.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1
Stirrer paddle
2
Stirrer paddle adapter
3
Drive spindle
4
Splash guard
5
Lock-on button for On/Off switch
6
On/Off switch
7
Auxiliary handle (insulated gripping surface)
8
Clamping lever for auxiliary handle
9
Clamping nut for splash guard
10
Handle (insulated gripping surface)
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Technical Data
Noise/Vibration Information
Measured sound values determined according to EN 60745.
Typically the A-weighted noise levels of the product are:
Sound pressure level 86 dB(A); Sound power level 97 dB(A).
Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a
h
(triax vector sum) and uncertainty K
determined according to EN 60745:
a
h
=2.5 m/s
2
, K=1.5 m/s
2
.
The vibration emission level given in this information sheet
has been measured in accordance with a standardised test
given in EN 60745 and may be used to compare one tool with
another. It may be used for a preliminary assessment of expo-
sure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained,
the vibration emission may differ. This may significantly in-
crease the exposure level over the total working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working pe-
riod.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep hands warm, organise work patterns.
Stirrer/Mixer
GRW 9
Professional
Article number
0 601 968 0..
Rated power input
W
900
Output power
W
475
No-load speed
min
-1
500
Rated speed
min
-1
400
Rated torque
Nm
60
Drive spindle dia.
"
5
/
8
Spindle collar dia.
mm
43
Weight according to
EPTA-Procedure 01/2003
kg
3.0
Protection class
/
II
The values given are valid for a nominal voltage [U] of 230 V. For differ-
ent voltages and models for specific countries, these values can vary.
Please observe the article number on the type plate of your machine.
The trade names of the individual machines may vary.
OBJ_BUCH-322-002.book Page 9 Wednesday, January 18, 2012 8:33 AM
RAMIRENT
