INTENDED USE
The rangefinder is intended for
measuring distances, lengths,
heights, clearances and for
calculating areas and volumes.
The rangefinder is suitable for
interior and exterior construction
site measuring.
PRODUCT FEATURES
The numbering of the product
features shown refers to the
illustration of the rangefinder on
the graphic page.
1
Reference point button
2
Memory retrieve button”
M=
”
3
Memory add button “
M +
”
4
MIN., MAX. measurement
button
5
Length, area and volume
measurement
6
Vial level
7
Display
8
Alignment aid
9
Laser warning label
10
Measurement button
11
Indirect measurement and
multi-surface area
measurement button
12
Memory subtraction
button ”
M –
”
13
Continuous laser
beam/change “unit of
measure” button
14
On/Off/Clear Button ”
C
”
15
Extension pin
16
Latch of the extension pin
17
1/4” threaded hole for
mounting optional tripod*
18
Latch of battery lid
19
Battery lid
20
Serial number label
21
Laser beam outlet
22
Reception lens
23
Protective case
24
Hand strap
25
Laser viewing glasses*
26
Laser target plate*
27
Hand strap mounting post
DISPLAY ELEMENTS
a
Measured values stored
b
Battery indication
c
Problem temperature
indicator
d
Measured value/result
e
Unit of measure
f
Measurement reference point
g
Laser switched on
h
Individual measured value (for
length measurement: result)
i
Measure mode indicators
Length measurement
Area measurement
Volume measurement
Indirect length measurement
Wall surface measurement
Minimum measurement
Maximum measurement
* Optional Accessories
-9-
Functional Description
MIN
MAX
