36
en | Maintenance / troubleshooting
Radio gateway
2019.10 | 2.0 | F.01U.373.488
Operation Manual
Bosch Sicherheitssysteme GmbH
7.3
Putting the radio cell into normal operation
S1
H2
H2
Figure
7.3: Radio gateway FWI-270
H2
LED (yellow) for maintenance mode (MC-State)
S1
Button for maintenance mode
The housing for the radio gateway is open.
The process of logging radio devices on to the radio gateway is complete.
1.
Check LED
(H2).
In 'maintenance mode', LED
(H2) flashes.
2.
Press and hold button
(S1) for at least 2
seconds.
P
LED
(H2) goes out.
P
The radio cell is in normal operation.
If necessary, check the panel controller settings.
7.4
Adding or removing radio devices
7.4.1
Adding radio devices
Wait until one radio device has been successfully logged on before
attempting to add the next radio device. The internal alarm indicator
for the radio device is off.
