Bosch FW5.50 Software Manual Download Page 22

Page: 22 / 94

en | Settings Overview

Camera Browser Interface

AM18-Q0611 | v5.50 | 2012.03

Software manual

Bosch Security Systems

Settings Overview

4.1

Configuration Menu

The settings page provides access to the configuration menu

which contains all the unit's parameters arranged in groups.

There are two options for configuring the unit or checking the

current settings:

–

Basic Mode

–

Advanced Mode

Basic Mode

the most important parameters are arranged in

several menu groups. This allows you to change the basic

settings with just a few entries and then put the device into

operation.

Advanced Mode

is recommended only for expert users or

system support personnel. You can access all device

parameters in this mode. Settings that affect the fundamental

functionality of the device (such as firmware updates) can only

be changed in this mode.

Summary of Contents for FW5.50































































































Search results

Summary of Contents for FW5.50

Reviews:

Related manuals for FW5.50

Brands by name

Popular brands

Bosch FW5.50, Software Manual

Search results

Summary of Contents for FW5.50

Reviews:

Related manuals for FW5.50

Brands by name

Popular brands